SAFE+
3-in-1 room sensor
-
Connected
A useful complement to a certified but unconnected CO detector
-
CO sensor****
Prevents fire hazards
-
Temperature / Humidity
Measures home environment parameters
-
CO
-
Temperature
-
Humidity
-
10 years*
-
LoRaWAN
Reliable at all times, for maximum safety
Carbon monoxide (CO) is a colorless, odorless and tasteless gas that is extremely hazardous to human health. It is produced by the incomplete combustion of fuels such as natural gas, coal, oil, wood and other combustibles.
Every second counts to warn occupants and enable them to react quickly.
Our carbon monoxide sensors are designed to operate optimally for 10 years, reacting quickly to the slightest indication of danger.
The connected sensor that saves you time!
This sensor is specially designed to meet the needs of lessors and building maintenance specialists.
The sensor is available with different radio protocol options.
Remote surveillance compatible
To report alarms, carry out troubleshooting, or arrange onsite intervention by an approved company
Remote maintenance
Be alerted in real time to product faults, low batteries or other critical parameters.
Simplify the management of your thousands of sensors, while ensuring the safety of your residents.
The 1st sensor designed for professionals
Do you have several thousand homes equipped with unconnected CO sensors?
The operational management of the installed base can quickly become complex due to frequent changes of residents, maintenance issues and necessary replacements.
Ensuring occupant protection and regulatory compliance requires a proactive approach.
The SAFE+ connected 3-in-1 carbon monoxide sensor is specifically designed to meet these challenges!
Digital logbook
QR Code + application to track the installation and complete maintenance of a fleet of sensors.
The digital logbook is a tracking tool specifically designed to meet the needs of lessors, owners and property maintenance specialists.
Monitors temperature and humidity in the home
SAFE+ combines the essential functions of a temperature and humidity sensor with the advantages of a CO sensor.
The device provides effective monitoring of ambient conditions in the home, while guiding you towards energy-saving measures and improved indoor air quality.
To avoid any risk of erroneous measurements, the product is approved for wall mounting, at a distance of between 30 and 60 cm below the ceiling.
Temperature
Accuracy: +/- 0.2°C
Humidity
Accuracy: +/- 2% RH
Regulatory compliance
Sensor calibration certificate issued by a COFRAC-accredited independant metrology laboratory
NAVIXIS: the digital logbook for monitoring connected devices
Ease of management
Information is stored and accessible online for simplified, centralized monitoring of a fleet of several thousand products.
Complete history
Traceability of installation and maintenance of each device: useful information for insurance purposes or regulatory inspections
Automated tracking
The logbook can be configured to send reminders when it's time to check or replace products
API interface and connectors
The digital notebook integrates easily with your favorite management software thanks to our APIs and dedicated connectors
Installation suitable for all installation configurations
Compact mounting base
Only 3 cm in diameter to avoid damaging the installation surface
Approved** 3M adhesive fastener
Install the sensor without screws or plugs. No need to drill walls if asbestos, pipes or cables are present
Universal mounting base**
Simplifies replacement of third-party products without drilling new mounting holes
Anti-tear detection
Triggers an alert message in the application if the sensor is removed from its mounting base
Anti-tear protection
Lockable mounting base to reduce the risk of sensor removal in rental housing
Control your sensor with your fingertips!
Need to test or stop your carbon monoxide alarm?
Easy and simple to carry out, thanks to the large touch-sensitive button on the front of the product
Silence function
Stops the alarm and/or puts the sensor on standby for 10 minutes without removing it from its base
Signal light
Discreet LED indicator in standby mode, powerful in alarm mode
The carbon monoxide detector has 3 different LEDs:
– Green: in operation
– Orange: maintenance to be scheduled
– Red: danger, carbon monoxide alert
Learn more
Show less
12-hour beep delay
Temporarily silences fault beeps until sensor is replaced
Specifications
-
Carbon monoxide
Technology : CO detection
by electrochemical sensor
CO: 0 – 1.000 ppm
Resolution: 1 ppm -
Temperature
Res.: 0.2°F
Acc.: ±0.4°F
Measurement range: -22°F to +158°F -
Humidity
Res. 0.5% R.H.
Prec. : ±2% R.H.
Measurement range: 0 – 100% R.H.
Features
-
Connectivity
-
-
Terms of use
Indoor environment
Temperature: -10°C to +50°C
Humidity: 10% RH to 95% RH
(non-condensing) -
Dimensions
105 x 105 x 35 mm
-
Mounting type
Wall, ceiling or free-standing
-
Warranty
2 years***
-
Set contents
1 sensor
1 BASE+ mounting base
1 removable FLEX free-standing bracket
1 FIX adhesive fastener
2 nylon screws and plugs
1 user manual -
Certification
-
References
| Reference | Battery | Radio | Frequency |
|---|---|---|---|
| X852LR | 10 years | LoRaWAN | 915 MHz |
10-year battery* life
- Very low power consumption for the sensor and on-board electronics
- Includes 2 sealed and soldered lithium batteries
Who says a CO sensor can't be stylish?
Most residents consider carbon monoxide sensors to have an imposing and unattractive design.
Our product combines technology with a modern, minimalist design that blends harmoniously with any interior décor.
Frequently Asked Questions
Our experts answer your questions
The connected carbon monoxide sensor can quickly detect high concentrations of this gas in the air and warn occupants of a room so they can take appropriate action. This gas is odorless, invisible and toxic: inhaling CO can trigger headaches, fatigue, nausea and vomiting, and can even be fatal.
Carbon monoxide emissions
The source of the CO may come from :
- Oil, coal and gas heating equipment…
- Wood stoves
- Gas and fire boilers
- Tobacco smoke
- Barbecues
- Gas appliances such as stove, oven, refrigerator…
WARNING: for your own safety, do not disable your sensor if it is operating correctly!
To switch off a sealed-battery sensor, simply take a paper clip, insert it into the square hole at the back of the product, and pull slightly to raise the switch. If the sensor has a changeable battery, simply remove the battery to switch the product off.
Please wait at least 20 seconds before switching the detector back on.
At the end of its service life, the connected carbon monoxide sensors reacts as follows:
- Orange indicator light flashes every 60 seconds
- Audible alert beeps 2 times every 60 seconds
The sensor is not operational. The sensor has been active for more than 10 years, and needs to be replaced.
*The battery is designed for a non-guaranteed autonomy of 10 years: battery autonomy may vary. Please refer to the “Precautions and Limitations” section of the user manual.
**Optional accessory available on request.
***Please refer to the “Warranty” section of the user manual.
****This product is not a CO detector. It is not a substitute for a certified CO detector. Consult the regulations in force in your country.